TONDIN PORTE S.R.L.

Wood Door for interior - collection PLANE; model INCISION

Doors and Frames

The doors to the interior of the Plane line, have hollow-core door made with the panel and MDF board, of the total thickness of 45 mm, and etching by about 3 mm x 2 mm, no shoulder to the jamb wire. perimeter of the wooden door panel structure of fir wood strips spliced comb, honeycomb internal structure honeycomb ape.L'anta is provided with lock latch only in standard polyamide, and optionally with a magnetic lock. The hinges used are flush adjustable rocker type with door rotation. The jamb is a single piece to size, made of slatted wood covered with MDF 4 mm, shaped and veneered, the total thickness of mm 44. On the frame is inserted a rubber gasket in extremely quiet extruded foam. The architraves in various essences have the smooth profile with interlocking milling on the jamb, and have dimensions from 12x90 mm. Variants: the incision is offered in the catalog in 7 different models, with the possibility to customize the door still engraved in the customer's design. The door is proposed in matt lacquer finish in 3 standard colors: white base, RAL 9010 and RAL 1013, or non-standard Other RAL on request. The model is available in dimensions Light Passage width up to 1000 mm and height up to 2900 mm. On doors with height exceeding 2200 mm is inserted to an inner tie rod series to give the opportunity to correct the planarity of the wing itself.

Note: All the information below was checked with advisor QualityNet support