MOTTURA S.P.A.
Technical Roller Blinds - Indoor and Outdoor
Window Treatments
The products currently affected by the mapping are the indoor and outdoor technical tent systems. Depending on the model and in compliance with the EN 13561 and EN 13120 standards, a curtain system is supplied to the customer with the fabrics applied to the mechanics in the production phase or only the mechanical component is supplied and the customer applies his own fabric on it. packaged.
Note: All the information below was checked with advisor QualityNet support
Green Features #4
Recyclable material
doneRecycled Content Preconsumer
doneRecycled Content Preconsumer
doneCE Mark
done
Credits for LEED® System #11
LEED NC ITALIA 2009
SSc7.2 Effetto isola di calore: coperture
SSc8 Riduzione dell'inquinamento luminoso
EAp2 Prestazioni energetiche minime
EAc1 Ottimizzazione delle prestazioni energetiche
MRc2 Gestione dei rifiuti da costruzione
MRc4 Contenuto di riciclato
QIc4.1 Materiali basso emissivi: adesivi, primers, sigillanti, materiali cementizi e finiture per legno
SSp1 Prevenzione dell'inquinamento da attività di cantiere
QIc8.1 Luce naturale e visione: luce naturale per il 75% degli spazi
LEED NC 2009
SSp1 Construction Activity Pollution Prevention
SSc7.2 Heat Island EffectRoof
SSc8 Light Pollution Reduction
EAp2 Minimum Energy Performance
EAc1 Optimize Energy Performance
MRc2 Construction Waste Management
MRc4 Recycled Content
IAQc4.1 Low-Emitting MaterialsAdhesives and Sealants
IAQc8.1 Daylight and ViewsDaylight
LEED 2009 FOR COMMERCIAL INTERIOR
EAp2 Minimum Energy Performance
EAc1.4 Optimize Energy PerformanceEquipment and Appliances
MRc2 Construction Waste Management
MRc4 Recycled Content
IAQc4.1 Low-Emitting MaterialsAdhesives and Sealants
IAQc8.1 Daylight and ViewsDaylight
LEED FOR SCHOOLS 2009
SSp1 Construction Activity Pollution Prevention
SSc7.2 Heat Island EffectRoof
SSc8 Light Pollution Reduction
EAp2 Minimum Energy Performance
EAc1 Optimize Energy Performance
MRc2 Construction Waste Management
MRc4 Recycled Content
IAQc4.1 Low-Emitting Materials - Adhesives & Sealants
IAQc8.1 Daylight and ViewsDaylight
IAQc9 Enhanced Acoustical Performance
LEED BD+C V4
SSp1 Construction Activity Pollution Prevention
SSc5 Heat Island Reduction
SSc6 Light Pollution Reduction
EAp2 Minimum Energy Performance
EAc2 Optimize Energy Performance
MRc3 Building Product Disclosure and Optimization - Sourcing of Raw Materials
MRc5 Construction and Demolition Waste Management
IAQc2 Low-Emitting Materials
IAQc6 Interior Lighting
IAQc7 Daylight
IAQc9 Acoustic Performance