Products VP-Modulo

VERDE PROFILO SRL

VP-Modulo

Wall Finishes

The innovative system VP-MODULO designed and patented by Verde Profilo® to realize Vertical Gardens. VP-MODULO is an innovation in the Vertical Gardens field. The system exploits the typical structural composition of ventilated facades, allowing installation on any type of surface. The adjustable brackets allow you to move the structure according to your needs. All the components of the system are plug-in without the necessity of screwing or drilling structural parts, thus reducing installation times and difficulty. The structure has been designed to allow simple installation. The trays can be planted with any essence and then inserted into the appropriate compartment. The tanks of the VP-MODULO system are composed of EPP, which, do not allow heat exchange, protecting the health of the plant root system. From this there derives a lower decay of the essences and a minor cost for maintenance interventions. The plants are housed in the ground and require a smaller amount of water, thanks to the water reserve placed inside our tanks. Obviously from an installation of Vertical Garden it also derives a protection of the building envelope, an energy saving given by the insulation exerted by the vertical garden, a continuous exchange of air, a barrier to sound and a better appearance of the building itself.

Note: All the information below was checked with advisor QualityNet support

Green Features #1

  • Recyclable Product Packaging

    done

Credits for LEED® System #14

LEED NC ITALIA 2009

SSc5.1 Sviluppo del sito: proteggere e ripristinare l'habitat

SSc6.1 Acque meteoriche: controllo della quantità

SSc6.2 Acque meteoriche: controllo della qualità

SSc7.2 Effetto isola di calore: coperture

GAp1 Riduzione dell'uso dell'acqua

GAc1 Gestione efficiente delle acque a scopo irriguo

EAp2 Prestazioni energetiche minime

EAc1 Ottimizzazione delle prestazioni energetiche

MRc2 Gestione dei rifiuti da costruzione

MRc4 Contenuto di riciclato

QIc3.2 Piano di Gestione IAQ: prima dell'occupazione

QIc4.1 Materiali basso emissivi: adesivi, primers, sigillanti, materiali cementizi e finiture per legno

LEED NC 2009

SSc5.1 Site Development—Protect or Restore Habitat

SSc6.1 Stormwater Design—Quantity Control

SSc6.2 Stormwater Design—Quality Control

SSc7.2 Heat Island Effect—Roof

WEp1 Water Use Reduction—20% Reduction

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

IAQc3.2 Construction IAQ Management Plan—Before Occupancy

IAQc4.1 Low-Emitting Materials—Adhesives and Sealants

LEED FOR SCHOOLS 2009

SSc5.1 Site Development—Protect or Restore Habitat

SSc6.1 Stormwater Design—Quantity Control

SSc6.2 Stormwater Design—Quality Control

SSc7.2 Heat Island Effect—Roof

WEp1 Water Use Reduction—20% Reduction

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

IAQc3.2 Construction IAQ Management Plan—Before Occupancy

IAQc4.1 Low-Emitting Materials - Adhesives & Sealants

LEED BD+C V4

SSc2 Site Development - Protect or Restore Habitat

SSc4 Rainwater Management

SSc5 Heat Island Reduction

WEp1 Outdoor Water Use Reduction

WEp2 Indoor Water Use Reduction

WEp3 Building-Level Water Metering

EAp2 Minimum Energy Performance

EAc2 Optimize Energy Performance

MRc3 Building Product Disclosure and Optimization - Sourcing of Raw Materials

MRc4 Building Product Disclosure and Optimization - Material Ingredients

MRc5 Construction and Demolition Waste Management

IAQc1 Enhanced Indoor Air Quality Strategies

IAQc2 Low-Emitting Materials

IAQc9 Acoustic Performance