Products AQ-Stone Microchip

AGGLONORD S.R.L.

AQ-Stone Microchip

Flooring

Composite marble, resin bonded (grains 0-15 mm) Flooring – Façades - Step Covering – Window Sills – Topps etc. Our composite marble is composed by approximately 95% of marble chips and -powder and approx. 5% of polyester resin as bonding agent and some colour pigments and additives. The recycled content of the marble chips and marble powder is approx. 20%-90%. Natural marble chips, resin and the additives are mixed in a vacuumized procedure, the mixture is filled into a mould and then compacted under high pressure in a second vacuumized procedure. A controlled heat development takes place, as well as a chemical reaction of the resin, resulting in a complete covering of the natural stone chips by the resin, forming a homogeneous block of stone, that can be processed, after being extracted from the mould, like a block of natural stone.

Note: All the information below was checked with advisor QualityNet support

Green Features #2

  • Recyclable material

    done

  • Recycled Content Preconsumer

    done

Credits for LEED® System #8

LEED NC ITALIA 2009

SSc6.1 Acque meteoriche: controllo della quantità

SSc6.2 Acque meteoriche: controllo della qualità

SSc7.1 Effetto isola di calore: superfici esterne

EAp2 Prestazioni energetiche minime

EAc1 Ottimizzazione delle prestazioni energetiche

MRc2 Gestione dei rifiuti da costruzione

MRc4 Contenuto di riciclato

MRc5 Materiali estratti, lavorati e prodotti a distanza limitata (materiali regionali)

LEED NC 2009

SSc6.1 Stormwater Design—Quantity Control

SSc6.2 Stormwater Design—Quality Control

SSc7.1 Heat Island Effect—Non-roof

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

MRc5 Regional Materials

LEED 2009 FOR COMMERCIAL INTERIOR

MRc2 Construction Waste Management

MRc4 Recycled Content

MRc5 Regional Materials

LEED FOR SCHOOLS 2009

SSc6.1 Stormwater Design—Quantity Control

SSc6.2 Stormwater Design—Quality Control

SSc7.1 Heat Island Effect—Non-roof

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

MRc5 Regional Materials

LEED BD+C V4

SSc4 Rainwater Management

SSc5 Heat Island Reduction

EAp2 Minimum Energy Performance

EAc2 Optimize Energy Performance

MRc3 Building Product Disclosure and Optimization - Sourcing of Raw Materials

MRc4 Building Product Disclosure and Optimization - Material Ingredients

MRc5 Construction and Demolition Waste Management

IAQc2 Low-Emitting Materials