Products MICROTOPPING

IDEAL WORK SRL

MICROTOPPING

Flooring

Ideal Work Microtopping is not a resin but a cement-polymer coating for use as a decorative finish (thickness 2-4 mm) for interior and exterior surfaces. Considered an example of a coating with great architectural and aesthetic value, Microtopping was formulated for the purpose of cladding, restoring and recreating vertical and horizontal surfaces whilst providing the much sought after effect of “cement finished” flooring. The material can be levelled manually. Microtopping is a material made up of liquid polymer and a special cement mixture that is blended manually by Ideal Work installers before each application, depending on the final outcome the customer requires. With a thickness of only 3 millimetres, Microtopping can cover any type of surface due to its remarkable adhesive properties. Its resistance to impact, abrasions and compression make it suitable for even heavy traffic and for any environment and circumstance. This is true for interiors, exteriors and places that are most exposed to atmospheric agents. Microtopping impedes penetration of water and de-icing salts as well as being resistant to UV rays and the elements in general. All this without ever losing sight of style. The polymer is MT-polymer, which is used as a liquid adhesive. Microtopping is a water based, Environmentally Friendly product.

Note: All the information below was checked with advisor QualityNet support

Green Features #3

  • Recyclable Product Packaging

    done
  • Recyclable material

    done
  • Direttiva 2004/42/EC

    done

Credits for LEED® System #6

LEED NC ITALIA 2009

SSc7.1 Effetto isola di calore: superfici esterne

EAp2 Prestazioni energetiche minime

EAc1 Ottimizzazione delle prestazioni energetiche

MRc2 Gestione dei rifiuti da costruzione

MRc4 Contenuto di riciclato

QIc4.3 Materiali basso emissivi: pavimentazioni

LEED NC 2009

SSc7.1 Heat Island Effect—Non-roof

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

IAQc4.3 Low-Emitting Materials—Flooring Systems

LEED 2009 FOR COMMERCIAL INTERIOR

MRc2 Construction Waste Management

MRc4 Recycled Content

IAQc4.3 Low-Emitting Materials—Flooring Systems

LEED FOR SCHOOLS 2009

SSc7.1 Heat Island Effect—Non-roof

EAp2 Minimum Energy Performance

EAc1 Optimize Energy Performance

MRc2 Construction Waste Management

MRc4 Recycled Content

IAQc4.3 Low-Emitting Materials - Flooring Systems

LEED D+C V4

SSc5 Heat Island Reduction

EAp2 Minimum Energy Performance

EAc2 Optimize Energy Performance

MRc3 Building Product Disclosure and Optimization - Sourcing of Raw Materials

MRc5 Construction and Demolition Waste Management

IAQc2 Low-Emitting Materials